LLC/LLD Stackable Clean Room
Despatch's LLC/LLD non-HEPA clean room oven is designed to save valuable floor space and provide maximum ergonomic efficiency for operators. The LLC/LLD is SEMI S2 and CE compliant for universal acceptance and configured for 220/240 volts and 50/60 Hz. Typical applications include die-bond curing and other semiconductor packaging processes.
The recirculation motor is mounted at the rear of the oven, providing convenient access and allowing up to three ovens to be stacked on top of one another, while still keeping loading heights ergonomically acceptable.
Standard Features
- Several features contribute to efficiency and overall effectiveness of this ISO Class 5 (Class 100) performer: Available in air or nitrogen atmosphere configurations
- Forced exhaust is standard on the air atmosphere units for rapid cooling
- Programmable control of the nitrogen and cooling water is standard on the nitrogen atmosphere units
- Lockable Disconnect Switch on the control panel for easy servicing
- Protocol Plus™ microprocessor control makes oven operation simple and flexible
- Stainless steel interior with all interior seams continuously welded on the insulation side to protect the work chamber from contamination
- Programmable door lock prevents operators from opening oven door when cycle is in process
- Electric door release for ergonomic operation
- UL & C-UL Listed open control panel
- CE & SEMI S2 compliant
Options
- Silicone-free construction
- PC interface for remote input, monitoring and recording (RS485/422/232)
- Door interlock switch turns off heater and fan when door is opened
- Cleaning and triple bagging in clean room prior to shipment
- Real time clock for programmed oven start-up
- End of cycle and high limit audible and visual alarms
- Process control interlock systems
- Chart recorders
- Three color process stack light
- Teflon™ shelf supports (LLC only)
- Stacking hardware
- Skirted stands
- Extra shelves
- Oxygen analyzer
- Data acquisition software
- Customization available
LCC/LCD Stackable Clean Process Oven
Despatch's LCC and LCD Stackable Clean Process Ovens have a stainless steel interior and exterior, rugged, programmable process controls and provide a variety of tailored options for your specific needs. For production environment processes where minimal contamination is essential, the LCC and LCD Series ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber. Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilization and drying for life sciences. The ovens are SEMI S2 and CE compliant for universal acceptance and configured for 220/240 volts and 50/60 hz.
These units are stackable to save valuable floor space and provide maximum ergonomic efficiency for operators. The recirculation motor is mounted at the rear of the oven, providing convenient access and allowing up to three ovens to be stacked on top of one another, while still keeping loading heights ergonomically acceptable.
It is available in two different atmosphere configurations:
Air Atmosphere - A forced exhaust fan is included on the air temperature unit for rapid cooling.
Inert Atmosphere - Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol Plus™ controller.
Standard Features
- LCD: 350°C maximum temperature
- LCC: 260°C maximum temperature
- Lockable Disconnect Switch on the control panel for easy servicing
- Protocol Plus™ microprocessor control makes oven operation simple and flexible
- Stainless steel interior with all interior seams continuously welded on the insulation side to protect the work chamber from contamination
- Programmable door lock prevents operators from opening oven door when cycle is in process
- Door Interlock switch turns off heater when door is open
- Recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered for ISO Class 5 (Class 100) operation throughout the process cycle
- Magnehelic™ gauge monitors the HEPA filter pressure drop so you know when it is time to replace the filter
- Electric door release for ergonomic operation
- UL & C-UL Listed open control panel
- CE & SEMI S2 compliant
Options
- Silicone-free construction
- PC interface for remote input, monitoring and recording (RS485/422/232)
- Door interlock switch turns off heater and fan when door is opened
- Cleaning and triple bagging in clean room prior to shipment
- Real time clock for programmed cycle or profile start
- End of cycle and high limit audible and visual alarms
- Process control interlock systems
- Chart recorders
- IQ/OQ protocol
- Three color process stack light
- Stacking hardware
- Skirted stands
- Extra shelves
- Data acquisition software
- Oxygen concentration monitor system
- Customization available
Products 
