LCC2-14 Clean Process Oven

Despatch’s 14 cubic foot clean process ovens are designed to meet the demands of production and large scale R&D environments. A variety of tailored options are available to meet your specific needs. Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilization and drying for life sciences. The ovens are SEMI S2 and CE compliant for universal acceptance, configured for 50/60 hz and available in all voltages used around the world.
Where minimal contamination is essential, the LCC /LCD2-14 Series ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber.

It is available in three different atmosphere configurations:
Inert Atmosphere - Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol PlusTM Controller.
Class A Atmosphere - Meets NFPA requirements for processing flammable solvents, including a pressure relief panel (rear of oven), purge timer, and forced exhaust.
Air Atmosphere - A forced exhaust fan is included on the air atmosphere unit for rapid cooling.

Standard Features

• LCD/LLD2-14: 350°C (662°F) maximum temperature
• LCC/LLC2-14: 260°C (500°F) maximum temperature
• Lockable Disconnect Switch on the control panel for easy servicing.
• Protocol Plus™ programmable microprocessor control makes oven operation simple and flexible.
• Programmable door lock with electronic release prevents operators from opening oven door when cycle is in process.
• Stainless steel interior and exterior with all interior seams continuously welded on the insulation side to protect the work chamber from contamination.
• Available with HEPA filtration– Recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered for operation at ISO Class 5 (Class 100) throughout the cycle.
• Magnehelic™ gauge monitors the HEPA filter pressure drop so you know when it is time to replace the filter.
• UL & C-UL Listed open control panel.
• CE & SEMI S2 compliant.

Options

• Silicone-free construction
• PC interface for remote input, monitoring and recording (RS485/422/232)
• Door interlock switch turns off heater and fan when door is opened
• Cleaning and triple bagging in clean room prior to shipment
• End of cycle and high limit audible and visual alarms
• Real time clock for programmed cycle or profile start
• End of cycle and high limit audible and visual alarms
• Oxygen concentration monitor system
• Chart recorders
• IQ/OQ protocol
• Three color process stack light
• Teflon™ shelf supports (LLC2-14 and LCC2-14 only)
• Pass-through doors (Air atmosphere only)
• Stacking hardware
• Skirted stands
• Extra shelves
• Data acuisition software
• Customization available